15 m Sample | 1.75 mm | Flexfill PEBA 90A "Natural"

 

This type of Flexfill is based on polyether-block-amide (PEBA), which was specially developed for processing by 3D printing. Although it is flexible with hardness 90 Shore A, it exhibits different thermal, mechanical, and chemical behavior from other Flexfill filaments (TPU, TPE)! 

Features:

  • Excellent mechanical properties
  • Flexible even at low temperatures
  • High reversible deformation
  • Rebound resilience preserved also at low temperature (down to -60 °C)
  • Great chemical resistance, for mention against car fluids (gasoline, diesel, oil, ...)
  • Resistant to cyclic loading without obvious damage
  • High energy return, low hysteresis
  • Tear resistance
  • The lowest density from flexible filaments
  • Recyclable, BPA free
  • Low fumes released
  • Safe for food contact applications (declaration sent per request)
  • Safe to use in electrical and electronic equipment

     

    Working temperature: 255–245 °C
    Heated bed: 70–90 °C
    Diameter: 1.75 mm
    Diameter tolerance:  +/- 0.10 mm
    The length of the filament: 15 m
    Available Spool variants:

     

     

    Comparison of our Flexfill family:

        Flexfill TPU Flexfill TPE Flexfill PEBA
    Polymer base   Polyurethane + ester Polyolefin + SEBS Polyamide + ether
    Tensile strength   49 MPa 5 MPa 36 MPa
    Elongation at break   600 % 250 % > 1000 %
    Density   1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
    Sensitivity to moisture High Low High
    Chemical resistance Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
    Food & skin contact Not recommended Certificated Not certificated
    Gas permeability High Low Medium
    Optical properties Glossy, transparent Matte, non-translucent Glossy, very transparent
    For example, ideal for applications Vibration Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
    Skin contact - Long-term touch of human skin (holding in hands) -
    Under temperature +80–100 °C +80 °C -40 °C
    In contact with Oils Water Car fluids
    Abrasion Sliding abrasion -

    Impingement abrasion

    Other - Outdoor Low density
    Rebounding


    The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

    Food Contact Declaration by request on helpdesk@fillamentum.com

     

    You may also like:

     

    Related products