PETG "Melon Yellow"

€29.65 EUR
Tax included.
Diameter
Low stock - 3 in stock, ready to ship
Description
Filament made of polyethylene terephthalate glycol (PETG) is widely used for 3D printing thanks to its specific properties and easy processing. PETG is an ideal material for prints with practical applications.

Features:

  • Low warping and shrinkage
  • Great layer adhesion
  • High strength & good hardness
  • Flexural resistance
  • Temperature resistance up to 70 °C
  • Low fumes released
  • Chemical resistance against water, acids, alkalis, and alcohols
  • Transparency and gloss
  • Safe for food contact applications according to EU regulation
  • Safe for food contact applications according to U.S.
  • Safe to use in electrical and electronic equipment
  • Recyclable & BPA-free & styrene-free

 

Working temperature: 235–255 °C
Heated bed: 65–75 °C
Diameter: 1.75 mm
Diameter tolerance: +/- 0.05 mm 
Weight:
1 kg of filament (+ 230 g spool)
The length of the filament:
325 m (1.75 mm, 1 kg)
RAL | Pantone | HEX:
N/A | N/A | N/A


 

Comparison of our copolyester filaments:

  CPE CF112 Carbon CPE HG100  PETG   PETG filaments*
Impact resistance 106 kJ/m2
(unnotched)
no break
(notched)
85 J/m
(notched)
98–126 J/m
(notched)
Tensile strength 52 MPa 48 MPa  50 MPa  26–45 MPa 
Elongation at break 8 % 150 % 120 %  58–110 % 
Hardness  94 R-Scale 115 R-Scale  105 R-Scale  108 R-Scale 
Flexural strength / 71 MPa 71 MPa 54–74 MPa 
Flexural modulus 1860 MPa 2150 MPa  1600–2100 MPa 
Wear resistance ★★★★ ★★ ★  ★ 
Creep resistance ★★★★  ★★ ★ 
Heat resistance (HDT) up to 100 °C 80 °C  70 °C  70 °C 
Chemical resistance to acids, bases,
hydrocarbons
good good  poor  poor 
*publicly accessible information from other producers

 

The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

Food Contact Declaration by request on helpdesk@fillamentum.com

 


     

      Everything else you need

      Customer Reviews

      Based on 1 review
      100%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      A
      Andreas Brakhage
      Filament melon Yellow PETG

      Just ordered the wrong diameter instead of 1.75. Just waiting for the 1.75 melon yellow. Did some great printings with it in the past. I love this color.