NonOilen®
Need a sample? Check them out here!
-
After a long-term partnership with the research team of prof. Ing. Pavol Alexy, PhD. from the Slovak Technical University, we are proud to introduce a brand-new material that is like a dream in the plastic world – a fully biodegradable filament for 3D printing.
This special material is called NonOilen®.
This filament is made of polylactic acid and polyhydroxy butyrate blend (PLA/PHB). The content of PHB improves the toughness, temperature resistance, and especially biodegradability. It perfectly fits into the principles of the circular economy, it can be reused many times, therefore, you can reduce the waste, and once the lifetime ends, it can be recycled.
Features:
- 100% made of polymers from renewable resources (bio-based)
- High strength, toughness, hardness
- Temperature resistance up to 110 °C – right after 3D printing, no need to anneal
- Easy 3D printing comparable with PLA
- Long-term durability of printed object
- Safe for food contact applications
- Objects may be washed in the dishwasher
- Barrier properties
- Natural silk look
- Polymer may be recycled many times with retention of the features
- 100% biodegradable in industrial compost and electric composters
- Decomposition in compost is about 3x faster than PLA
- No microplastics polluting environment is created during the biodegradation
- Decomposes only in a biologically active environment
- The byproducts from the decomposition process don't cause the greenhouse effect
Working temperature:
175–195 °C
Heated bed:
0–50 °C
Available diameters:
1.75 mm and 2.85 mm
Diameter tolerance:
+/- 0.05 mm
Weight:
750 g of filament (+ 210 g spool)
The length of the filament:
250 m (1.75 mm, 750 g)
98 m (2.85 mm, 750 g)
RAL | Pantone | HEX:
N/A | N/A | N/A
- Data Sheets & 3D Printing Guide
- Drying filaments before processing
- Spools Dimensions
- For a good adhesion use PVA glue or 3DLac.
- The color tone can slightly vary due to the natural origin of the material.
Comparison of our biodegradable filaments:
PLA Extrafill
PLA Crystal Clear
Timberfill®
NonOilen®
Polymer base
polylactic acid
polylactic acid
mixture of biopolymers filled with 15 % of natural fibers
polylactic acid and polyhydroxy butyrate blend
Mechanical properties
stiff
stiff
brittle
tough
Biodegradability
industrial composter (months)
industrial composter (months)
industrial composter (months)
industrial composter,
electric composter (90 days)
Temperature resistance
without/after annealing
55 / 80 °C
55 / 110 °C
55 / 80 °C
110/110 °C
Optical properties
yellowish, transparent
clear, transparent
wood-like, non-translucent
yellowish, non-translucent
Moisture sensitive
•••
•••••
••••
••
Safe for food-contact applications
yes
yes
no
yes
Recyclability
Recyclable usually with loss of mechanical properties
Recyclable usually with loss of mechanical properties
Not recyclable
Recyclable, many times without loss of properties
The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.
Food Contact Declaration by request on helpdesk@fillamentum.com
_____________________________________________________________________
-
Po dlouhodobé spolupráci s výzkumným týmem prof. Ing. Pavla Alexyho, PhD. ze Slovenské technické univerzity jsme hrdí, že můžeme představit zcela nový materiál, který je jako sen plastikářského světa – zcela biodegradovatelný filament pro 3D tisk.
Tento speciální materiál se nazývá NonOilen®.
Tento filament je vyroben z blendu kyseliny polymléčné a polyhydroxybutyrátu (PLA/PHB). Obsah PHB zlepšuje houževnatost, teplotní odolnost a především biologickou rozložitelnost. Perfektně zapadá do principu cirkulární ekonomiky tím, že může být opakovaně používán, a proto můžete snížit množství vyprodukovaného odpadu a po skončení jeho funkčnosti může být recyklován.
Vlastnosti:
- 100% vyroben z polymerů z obnovitelných zdrojů (bio-based)
- Vysoká pevnost, houževnatost a tvrdost
- Teplotní odolnost až do 110 °C – hned po vytištění, není potřeba ho vytvrzovat
- Snadný 3D tisk srovnatelný s PLA
- Dlouhodobá životnost vytištěného objektu
- Bezpečný pro aplikace ve styku s potravinami
- Objekty mohou být umývány v myčce nádobí
- Bariérové vlastnosti
- Přírodní hedvábný vzhled
- Polymer může být mnohonásobně recyklován při zachování svých vlastností
- 100% biologicky odbouratelný v průmyslovém kompostu a elektrickém kompostéru
- Rozklad v kompostu je asi 3x rychlejší než PLA
- Při biodegradaci nevznikají žádné mikroplasty znečišťující životní prostředí
- Rozkládá se pouze v biologicky aktivním prostředí
- Vedlejší produkty rozkladu nezpůsobují skleníkový efekt
Teplota tisku:
175–195 °C
Teplota podložky:
0–50 °C
Dostupné průměry:
1,75 mm a 2,85 mm
Tolerance průměru:
+/- 0,05 mm
Hmotnost:
750 g filamentu (+ 210 g cívka)
Délka filamentu:
250 m (1,75 mm, 750 g)
98 m (2,85 mm, 750 g)
RAL | Pantone | HEX:
N/A | N/A | N/A
- Technické listy a manuály 3D tisku
- Sušení filamentů před zpracováním
- Rozměry cívek
- Pro dobrou adhezi použijte PVA lepidlo nebo 3DLac.
- Z důvodu přírodního původu materiálu se může mírně lišit barevný odstín.
Srovnání našich biorozložitelných filamentů:
PLA Extrafill
PLA Crystal Clear
Timberfill®
NonOilen®
Základ polymeru
Kyselina polymléčná
Kyselina polymléčná
Směs biopolymerů plněna 15 % přírodních vláken
Blend kyseliny polymléčné a polyhydroxybutyrátu
Mechanické vlastnosti
tuhý
tuhý
křehký
houževnatý
Biorozložitelnost
Průmyslový kompostér (měsíce)
Průmyslový kompostér (měsíce)
Průmyslový kompostér (měsíce)
Průmyslový kompostér, electrický kompostér (90 dní)
Teplotní odolnost
Bez vytvrzení/po vytvrzení
55/80 °C
55/110 °C
55/80 °C
110/110 °C
Optické vlastnosti
Nažloutlý, průhledný
Čirý, průhledný
Podobný dřevu, neprůsvitný
Nažloutlý, neprůsvitný
Citlivost na vlhkost
•••
•••••
••••
••
Bezpečný pro styk s potravinami
Ano
Ano
Ne
Ano
Recyklace
Recyklovatelný obvykle se ztrátou mechanických vlastností
Recyklovatelný obvykle se ztrátou mechanických vlastností
Nerecyklovatelný
Recyklovatelný, několikrát bez ztráty vlastností
Vstupní materiál byl pečlivě vybrán tak, aby bylo dosaženo nejlepší možné zpracovatelnosti a výsledných vlastností. Produkty značky Fillamentum jsou vždy vyráběny z precizně vybraného typu materiálu s nejvyšší stabilitou napříč šaržemi. Zákazníci se mohou spolehnout na nejlepší kvalitu kdykoliv použijí náš filament.
Prohlášení o shodě pro styk s potravinami na vyžádání na helpdesk@fillamentum.com .
-
Nach einer langfristigen Partnerschaft mit dem Forschungsteam von prof. Ing. Pavol Alexy, PhD. von der Slowakischen Technischen Universität, sind wir stolz darauf, ein brandneues Material vorstellen zu können, das wie ein Traum in der Kunststoffwelt ist - ein vollständig biologisch abbaubares Filament für den 3D-Druck.
Dieses spezielle Material wird NonOilen® genannt.
Dieses Filament besteht aus einer Mischung aus Polymilchsäure und Polyhydroxybutyrat (PLA / PHB). Der Gehalt an PHB verbessert die Zähigkeit, Temperaturbeständigkeit und insbesondere die biologische Abbaubarkeit. Es passt perfekt zu den Prinzipien der Kreislaufwirtschaft, kann viele Male wiederverwendet werden, und daher wird der Abfall reduziert. Außerdem kann das NonOilen nach Ablauf der Lebensdauer recycelt werden.
Eigenschaften:
- 100% aus Polymeren aus nachwachsenden Rohstoffen (biobasiert)
- Hohe Festigkeit, Zähigkeit, Härte
- Temperaturbeständigkeit bis 110 ° C - direkt nach dem 3D-Druck, d.h. muss nicht geglüht werden
- Einfacher 3D-Druck vergleichbar mit PLA
- Langzeitbeständigkeit des Druckobjekts
- Sicher für Anwendungen mit Lebensmittelkontakt
- Gegenstände können in der Spülmaschine gewaschen werden
- Barriere Eigenschaften
- Naturseidenoptik
- Polymer kann unter Beibehaltung der Merkmale viele Male recycelt werden
- 100% biologisch abbaubar in Industriekompost und Elektrokompostern
- Die Zersetzung in Kompost ist etwa dreimal schneller als bei PLA
- Während des biologischen Abbaus entsteht keine Umweltverschmutzung durch Mikroplastik
- Zersetzt sich nur in einer biologisch aktiven Umgebung
- Die Nebenprodukte des Zersetzungsprozesses verursachen keinen Treibhauseffekt
Drucktemperatur:
175–195 °C
Heizbetttemperatur:
0–50 °C
Durchmesser:
1.75 mm und 2.85 mm
Durchmessertoleranz:
+/- 0.05 mm
Gewicht:
750 g des Filaments (+ 210 g Spule)
Länge des Filaments:
250 m (1.75 mm, 750 g)
98 m (2.85 mm, 750 g)
RAL | Pantone | HEX:
N/A | N/A | N/A
- Datenblätter und 3D-Druckanleitungen
- Trocknen der Filamente vor der Verarbeitung
- Spulenabmessung
- Für eine gute Haftung PVA glueoder 3DLac
- Der Farbton kann aufgrund der natürlichen Herkunft des Materials leicht variieren.
Vergleich unserer biologisch abbaubaren Filamente:
PLA Extrafill
PLA Crystal Clear
Timberfill®
NonOilen®
Polymerbasis
Polymilchsäure
Polymilchsäure
Mischung von Biopolymeren, gefüllt mit 15% natürlichen Fasern
Polymilchsäure und Polyhydroxybutyrat Mischung
Mechanische Eigenschaften
steif
steif
spröde
zäh
Biologische Abbaubarkeit
Industriekomposter
(Monate)
Industriekomposter
(Monate)
Industriekomposter
(Monate)
Industriekomposter, elektrischer Komposter (90 Tage)
Temperaturbeständigkeit
ohne / nach dem Glühen
55 / 80 °C
55 / 110 °C
55 / 80 °C
110/110 °C
Optische Eigenschaften
gelblich, transparent
klar, transparent
holzartig, nicht durchscheinend
gelblich, nicht durchscheinend
Feuchtigkeitsempfindlich
•••
•••••
••••
••
Geeignet für Lebensmittelanwendungen
Ja
Ja
Nein
Ja
Recyclingfähigkeit
ohne Verlust der mechanischen Eigenschaften recycelbar
ohne Verlust der mechanischen Eigenschaften recycelbar
nicht recycelbar
ohne Verlust der Eigenschaften recycelbar
Das Eingangsmaterial wurde sorgfältig ausgewählt, um die beste Verarbeitbarkeit und die endgültigen Eigenschaften zu erzielen. Die Produkte von Fillamentum werden immer aus dem genau angegebenen Material hergestellt, mit der höchsten Stabilität über alle Chargen hinweg. Die Kunden können sich jederzeit auf die beste Qualität verlassen, wenn sie unser Filament verwenden.
Erklärung zum Lebensmittelkontakt auf Anfrage unter helpdesk@fillamentum.com
Share this item: