Flexfill PEBA 90A "Blue Transparent"

€69.83 EUR
Diameter
Description

This type of Flexfill is based on polyether-block-amide (PEBA), which was specially developed for processing by 3D printing. Although it is flexible with hardness 90 Shore A, it exhibits different thermal, mechanical, and chemical behavior from other Flexfill filaments (TPU, TPE)!

Features:

  • Excellent mechanical properties
  • Flexible even at low temperatures
  • High reversible deformation
  • Rebound resilience preserved also at low temperature (down to -60 °C)
  • Great chemical resistance, for mention against car fluids (gasoline, diesel, oil, ...)
  • Resistant to cyclic loading without obvious damage
  • High energy return, low hysteresis
  • Tear resistance
  • The lowest density from flexible filaments
  • Recyclable, BPA free
  • Low fumes released
  • Safe for food contact applications (declaration sent per request)
  • Safe to use in electrical and electronic equipment

 

Working temperature: 225–245 °C
Heated bed: 70–90 °C
Diameter: 1.75 mm
Diameter tolerance: +/- 0.10 mm 
Weight:
500 g of filament (+ 230 g spool)
The length of the filament:
210 m (1.75 mm, 500 g)
RAL | Pantone | HEX:
N/A | P. 286C | N/A


 

Comparison of our Flexfill family:

    Flexfill TPU Flexfill TPE Flexfill PEBA
Polymer base   Polyurethane + ester Polyolefin + SEBS Polyamide + ether
Tensile strength   49 MPa 5 MPa 36 MPa
Elongation at break   600 % 250 % > 1000 %
Density   1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
Sensitivity to moisture High Low High
Chemical resistance Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
Food & skin contact Not recommended Certificated Not certificated
Gas permeability High Low Medium
Optical properties Glossy, transparent Matte, non-translucent Glossy, very transparent
For example, ideal for applications Vibration Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
Skin contact - Long-term touch of human skin (holding in hands) -
Under temperature +80–100 °C +80 °C -40 °C
In contact with Oils Water Car fluids
Abrasion Sliding abrasion -

Impingement abrasion

Other - Outdoor Low density
Rebounding


The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

Food Contact Declaration by request on helpdesk@fillamentum.com

 

 

 

You may also like:


    Everything else you need

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)