15 m Sample | 1.75 mm | Nylon CF15 Carbon

€3.31 EUR
In stock
Description

This filament is made of polyamide 12 reinforced with 15 % of milled carbon fibers.
It is characterized by high strength, high thermal and chemical resistance, great processing stability, and rheological properties.

The material is suitable for the production of continually stressed parts, such as bearings, cogwheels, reinforcement parts, etc.

Features:

  • Mechanical properties retained also under low temperatures
  • Wear resistance
  • Suitable for printing continually stressed parts
  • Stiffness & strength
  • Creep resistance (resistance against deformation under long-term load)
  • Great temperature resistance
  • High hardness
  • Nice & smooth surface
  • Low density
  • Chemical resistance against a wide range of substances
  • Improved tensile strength
  • Low thermal expansion
  • Safe to use in electrical and electronic equipment

       

      Working temperature: 235–260 °C
      Heated bed: 80–110 °C
      Diameter: 1.75 mm
      Diameter tolerance:  +/- 0.10 mm
      The length of the filament: 15 m
       Available Spool variants:

       


      Comparison of our Nylon family:

        Nylon AF80 Aramid Nylon CF15 Carbon Nylon FX256
      Tensile strength 50.4 MPa 54.5 MPa 45 MPa
      Elongation at break 5.8 % 103 % 50 %
      Impact resistance 53.2 kJ/m² (unnotched) ★ 86.2 kJ/m² (unnotched) ★ 7 kJ/m² (notched) ★★★
      Ease of printing ★★★ ★★
      Wear resistance ★★★ ★★★ ★★
      Creep resistance ★★★ ★★★
      Heat resistance from -40 °C up to 140 °C from -40 °C up to 140 °C from -40 °C up to 140 °C
      Heat resistance at high load ★★★★ ★★★

       

      The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

       

      You may also like:

       

      Everything else you need
      Type: sample