15 m Sample | 1.75 mm | Flexfill TPE 90A

€3.50 EUR
Tax included.
Color
Low stock - 4 in stock, ready to ship
Description

Flexible material based on polyolefinic thermoplastic elastomer with hardness 90 Shore A. This filament is safe for food-contact applications and for applications in contact with skin.

Wear resistance guarantees the durability of 3D printed products. Great for sealings especially in the presence of certain substances, the ability to seal is preserved also at higher temperatures. This material has very low gas permeability.

Features:

  • Safe for food-contact and skin-contact applications 
  • Dimensional stability
  • Smooth matte finish
  • Pleasant to touch
  • Tear strength, abrasion resistance
  • Chemical resistance against acids, alcohols, alkalis, and water
  • Resistant against dirt, washable
  • Recyclable
  • BPA-free
  • Low odor
  • Safe to use in electrical and electronic equipment

 

Working temperature: 255–245 °C
Heated bed: 50–60 °C
Diameter: 1.75 mm
Diameter tolerance:  +/- 0.10 mm
The length of the filament: 15 m
Available Spool variants:

 

 

Comparison of our Flexfill family:

    Flexfill TPU Flexfill TPE Flexfill PEBA
Polymer base   Polyurethane + ester Polyolefin + SEBS Polyamide + ether
Tensile strength   49 MPa 5 MPa 36 MPa
Elongation at break   600 % 250 % > 1000 %
Density   1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
Sensitivity to moisture High Low High
Chemical resistance Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
Food & skin contact Not recommended Certificated Not certificated
Gas permeability High Low Medium
Optical properties Glossy, transparent Matte, non-translucent Glossy, very transparent
For example, ideal for applications Vibration Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
Skin contact - Long-term touch of human skin (holding in hands) -
Under temperature +80–100 °C +80 °C -40 °C
In contact with Oils Water Car fluids
Abrasion Sliding abrasion -

Impingement abrasion

Other - Outdoor Low density
Rebounding


The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

Food Contact Declaration by request on helpdesk@fillamentum.com

 

You may also like:

 

Everything else you need
Type: sample

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
0%
(0)
33%
(1)
0%
(0)
M
Martin Brieda
Flexfill TPE 90A - Black, Flexfill TPE 96A - Traffic Red. Flexfill TPE 96A - Blue

The only pros of these products are colors, which are really nice. Other than that, both filaments (TPE 90A and TPE 96A) are incredibly hard to print. Adhesion to print bed is almost non-existent and after a couple of first layers the previous layers start to shrink (not dimensionally stable) and print fails. Unfortunately, any of the adhesives (3DLAC, Magigoo) won't help as shirking of the material is just as significant. The only thing that helped was to set a birm to 12 mm (!) which managed to held print stick to print bed. Once i managed to successfully finish the print i just found out that printed material, especially on layer edges is too scratch-prone, what disqualified it for any daily usage where esthetic matters, as it will get wear pretty fast.

The print setting was set according to guide on your websites.

I only printed small objects (>10cm) so i can't say what is the behavior for bigger kind of prints.

PS: I love your (other) filaments, yet this one is unfortunately way below expectations. Please try to fix the issues mention above, i would love to use this filament in the future :)

G
Gert Menke
Good, as expected

Works well with Prusa MK4.

G
Gatis Gribusts

15 m Sample | 1.75 mm | Flexfill TPE 90A