15 m Sample | 1.75 mm | Flexfill TPE 96A

€3.50 EUR
Tax included.
Color
Low stock - 1 available
Description

Semi-flexible material based on polyolefinic thermoplastic elastomer with hardness 96 Shore A. This filament is safe for food-contact applications and for applications in contact with skin.

Wear resistance guarantees the durability of 3D printed products. Great for sealings especially in the presence of certain substances, the ability to seal is preserved also at higher temperatures. This material has very low gas permeability.

Features:

  • Safe for food-contact and skin-contact applications
  • Dimensional stability
  • Smooth matte finish
  • Pleasant to touch
  • Semi-flexible
  • Tear strength, abrasion resistance
  • Chemical resistance against acids, alcohols, alkalis, and water
  • Resistant against dirt, washable
  • Recyclable
  • BPA-free
  • Low odor
  • Safe to use in electrical and electronic equipment

     

    Working temperature: 255–245 °C
    Heated bed: 50–60 °C
    Diameter: 1.75 mm
    Diameter tolerance:  +/- 0.10 mm
    The length of the filament: 15 m
    Available Spool variants:

     

      

    Comparison of our Flexfill family:

        Flexfill TPU Flexfill TPE Flexfill PEBA
    Polymer base   Polyurethane + ester Polyolefin + SEBS Polyamide + ether
    Tensile strength   49 MPa 5 MPa 36 MPa
    Elongation at break   600 % 250 % > 1000 %
    Density   1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
    Sensitivity to moisture High Low High
    Chemical resistance Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
    Food & skin contact Not recommended Certificated Not certificated
    Gas permeability High Low Medium
    Optical properties Glossy, transparent Matte, non-translucent Glossy, very transparent
    For example, ideal for applications Vibration Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
    Skin contact - Long-term touch of human skin (holding in hands) -
    Under temperature +80–100 °C +80 °C -40 °C
    In contact with Oils Water Car fluids
    Abrasion Sliding abrasion -

    Impingement abrasion

    Other - Outdoor Low density
    Rebounding


    The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

    Food Contact Declaration by request on helpdesk@fillamentum.com

     

    You may also like:

     

    Everything else you need
    Type: sample