Free shipping to the Czech Republic and Germany for orders over 100€

Flexfill TPU 92A "Metallic Grey"

€29.17 EUR
Diameter
In stock
Description

Discover all Flexfill TPU 92A:

Thermoplastic polyurethane with hardness 92 Shore A. A technical flexible filament that offers great mechanical properties such as high tear and tensile strength.
It is characterized by highly reversible deformation, resistance to ozone, oils, greases, and aliphatic alcohols. Wear resistance guarantees the durability of 3D printed products. Great for the printing of continually sliding parts or sealings.

Features:

  • Can be used for the final surface treatment
  • Great interlayer adhesion ensuring tear strength in all the directions
  • Excellent abrasion resistance
  • Good rebound resilience
  • High elasticity with highly reversible deformation
  • Safe to use in electrical and electronic equipment
  • Flexible
  • Low warping
  • BPA-free and styrene-free
  • Recyclable

 

Working temperature: 220–240 °C
Heated bed: 50–60 °C
Diameter: 1.75 mm and 2.85 mm
Diameter tolerance: +/- 0.10 mm 
Weight:
500 g of filament (+ 230 g spool)
The length of the filament:
175 m (1.75 mm, 500 g)
70 m (2.85 mm, 500 g)
RAL | Pantone | HEX:
N/A | N/A | N/A


 

Comparison of our Flexfill family:

    Flexfill TPU Flexfill TPE Flexfill PEBA
Polymer base   Polyurethane + ester Polyolefin + SEBS Polyamide + ether
Tensile strength   49 MPa 5 MPa 36 MPa
Elongation at break   600 % 250 % > 1000 %
Density   1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
Sensitivity to moisture High Low High
Chemical resistance Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
Food & skin contact Not recommended Certificated Not certificated
Gas permeability High Low Medium
Optical properties Glossy, transparent Matte, non-translucent Glossy, very transparent
For example, ideal for applications Vibration Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
Skin contact - Long-term touch of human skin (holding in hands) -
Under temperature +80–100 °C +80 °C -40 °C
In contact with Oils Water Car fluids
Abrasion Sliding abrasion -

Impingement abrasion

Other - Outdoor Low density
Rebounding


The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

 

 

   

 

Everything else you need