Any order placed before 11:30 AM (CET) on any weekday is shipped on the same day.

Flexfill TPE 90A "Natural"

Flexible material based on polyolefinic thermoplastic elastomer with hardness 90 Shore A. This filament is safe for food-contact applications and for applications in contact with skin.

Wear resistance guarantees the durability of 3D printed products. Great for sealings especially in the presence of certain substances, the ability to seal is preserved also at higher temperatures. This material has very low gas permeability.

Features:

  • Safe for food-contact and skin-contact applications
  • Dimensional stability
  • Smooth matte finish
  • Pleasant to touch
  • Tear strength, abrasion resistance
  • Chemical resistance against acids, alcohols, alkalis, and water
  • Resistant against dirt, washable
  • Recyclable
  • BPA-free
  • Low odor
  • Safe to use in electrical and electronic equipment

 

Working temperature: 225–245 °C
Heated bed: 50–60 °C
Diameter: 1.75 mm
Diameter tolerance: +/- 0.10 mm 
Weight:
500 g of filament (+ 230 g spool)
The length of the filament:
170 m (1.75 mm, 500 g)
RAL | Pantone | HEX:
N/A | N/A | N/A


 

Comparison of our Flexfill family:

    Flexfill TPU Flexfill TPE Flexfill PEBA
Polymer base   Polyurethane + ester Polyolefin + SEBS Polyamide + ether
Tensile strength   49 MPa 5 MPa 36 MPa
Elongation at break   600 % 250 % > 1000 %
Density   1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
Sensitivity to moisture High Low High
Chemical resistance Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
Food & skin contact Not recommended Certificated Not certificated
Gas permeability High Low Medium
Optical properties Glossy, transparent Matte, non-translucent Glossy, very transparent
For example, ideal for applications Vibration Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
Skin contact - Long-term touch of human skin (holding in hands) -
Under temperature +80–100 °C +80 °C -40 °C
In contact with Oils Water Car fluids
Abrasion Sliding abrasion -

Impingement abrasion

Other - Outdoor Low density
Rebounding


The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customers can rely on the best quality at any time they use our filament.

Food Contact Declaration by request on helpdesk@fillamentum.com

 

You may also like:

 

    Related products